Model FPB (Down Stroke):
|Voltage||380 V/50 Hz|
|Stroke||300 - 760 mm/Inch|
|Power Required||3 - 7.5 hp|
|Pulley size||100 - 200 mm|
|Nominal Capacity||50 - 630 Ton|
These Screw pressue are designed for heavy duty operatione for pressing of fire bricks. The four columns are fitted with replaceable wearing liners and machined to close loterances to ensure perfect seating of cross beam. Which is most essential for lamination fire bricks. An ejector is provided at the lower part of the table base.Model VFP (LIP Stroke):
These screw presses are specially designed to make bolt head of any kinds of nuts, rivets, motor parts, axie half shalft, engine valve and nonferrous forgings. Vincent presses are screw presses with friction drive on which the forging blow takes place in an upward direction i.e. from bottom towards top. On machines employing the vincent principle the screw nut is positioned in the top cross head of a frame type ram. Thus ram being moved upwards in exial direction by rotation of longitudinally fixed screw. The bottom die of the Forging tools is secured to the lower cross head of the ram While the top dia is fitted to a fixed bridge which is the part of the machine frame be employing this design, the forging forces do not act on the machine frame but are sustained by the ram Ejector is provided at the lower part of the ram.