Atlas Machine Tools Corp.
Ludhiana, Punjab
GST No. 03AAFFA1956J1ZN
TrustSEAL Verified
Call 08047639938 81% Response Rate
SEND EMAIL
Product Details:
| Capacity | 200 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Single |
| Platen Size | 500 x 500 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 350 mm |
| Bore Diameter | 350 mm |
| Motor Power | 10 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 100 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Single |
| Platen Size | 350 x 350 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 250 mm |
| Bore Diameter | 250 mm |
| Motor Power | 5 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 800 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Single |
| Platen Size | 1200 x 800 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 500 mm |
| Bore Diameter | 710 mm |
| Motor Power | 30 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 500 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Single |
| Platen Size | 900 x 750 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 450 mm |
| Bore Diameter | 560 mm |
| Motor Power | 20 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 400 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Double |
| Platen Size | 800 x 650 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 400 mm |
| Bore Diameter | 510 mm |
| Motor Power | 20 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 600 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Single |
| Platen Size | 1000 x 800 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 450 mm |
| Bore Diameter | 610 mm |
| Motor Power | 25 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 250 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Single |
| Platen Size | 600 x 600 mm |
| Heating of Platens | Electrical Heater |
| Stroke Length | 350 mm |
| Bore Diameter | 400 mm |
| Motor Power | 10 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 1000 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Single |
| Platen Size | 1350 x 1000 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 550 mm |
| Bore Diameter | 810 mm |
| Motor Power | 50 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 300 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Double |
| Platen Size | 700 x 600 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 400 mm |
| Bore Diameter | 460 mm |
| Motor Power | 15 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 50 Tons |
| Machine Type | Closed Frame |
| No. of Station | Single |
| Platen Size | 250 x 250 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 150 mm |
| Bore Diameter | 180 mm |
| Motor Power | 3 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Product Details:
| Capacity | 150 Tons |
| Machine Type | 4-Pillar Type |
| No. of Station | Double |
| Platen Size | 450 x 450 mm |
| No. of Daylight | One |
| Heating of Platens | Electrical Heater |
| Stroke Length | 300 mm |
| Bore Diameter | 300 mm |
| Motor Power | 7.5 HP |
| Condition | New |
| Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank ( of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application: